( Highly Efficient Dechlorination Agent )
Feed water to membrane systems often has been treated with chlorine to retard microbiological growth prior to the membrane separation process. This chlorine, however, can irreversibly damage many thin film composite membranes. Dechlorinator for RO is a blend of high performance synthetic compounds, used for de-chlorination of RO feed water..
pH (as such) | 2.0 - 3.0 |
---|---|
Appearance | White Powder |
Water Solubility | Completely Soluble |
Specific Gravity | 1.05 - 1.10 |
Contents | Powder formulation for on-site preparation |
Acuro's pH Booster for RO is a rigorous blend of alkalinity builder, softening agent and synthetic organic sludge conditioner. It counteracts the fall in pH in the permeate water due to removal of salts. It is highly compatible and ready to use composition for potable applications.
We offer premium quality pH booster for use in RO systems. It is a uniquely formulated, multifunctional liquid, manufactured specifically for low hardness softened water and demineralized Water.
pH (as such) | 9.0 to 10.0 |
---|---|
Appearance | Clear Liquid |
Water Solubility | Completely Soluble |
Specific Gravity | 1.07 to 1.11 |
( Inhibits & Removes Bacteria, ALGAE Fungi, Organic Growth )
Biofouling is inevitable in every membrane system; however, using RO BIOCIDE™ you can minimize the impact of biogrowth on the operation of your RO system. The right biocide program can reduce your need for membrane cleaning, reducing your overall cost of operation. Our RO BIOCIDE™ are membrane safe and can be used online or offline.
RO BIOCIDE™ is a blend of high performance non-oxidizing biocides, helps in keeping away biofouling and formation of biofilms in the membrane. It is safe and biodegradable biocide which is effective against wide spectrum micro-organisms & requires low dosage level for accelerated response followed by gradual action for effective removal of algae, fungi and bacteria. Biofouling of RO membrane can result in various severe problems such as poor and contaminated permeate quality, reduced flow rate, increase in power and reduced productivity.
pH (as such) | 7.0 - 8.0 |
---|---|
Appearance | Clear Liquid |
Water Solubility | Completely Soluble |
Specific Gravity | 1.12 - 1.16 |
Contents | Blend of Non-oxidizing Biocides |
AQUAPURE ENGINEERING is offering speciality "Membrane Cleaning Chemical" which is used for cleaning RO membranes by removing and dispersing the deposited scale. This chemical is used to remove inorganic scales of calcium carbonate, calcium sulphate, magnesium, barium, strontium sulphate, fluoride, iron and silica.
AQUAPURE RO Maintenance Chemicals performance can be enhanced by adding low / high ph cleaners to the cleaning solution although some minor ph correction may be necessary.
AQUAPURE ENGINEERING offers a full range of Antiscalant and membrane cleaners to ensure the longevity and maximum production from your RO Plant.
It is safe to handle but use of safety goggles and hand gloves are recommended. In case of contact with skin, wash with copious amount of water
This product should be stored in cool and dry places, away from sources of heat, flame and direct sunlight for more shelf life.
Feed water to membrane systems often has been treated with chlorine to retard microbiological growth prior to the membrane separation process. This chlorine, however, can irreversibly damage many thin film composite membranes. RO Preservative is a blend of high performance synthetic compounds, used for de-chlorination of RO feed water.
pH (as such) | 2.5 - 3.5 |
---|---|
Appearance | Liquid |
Water Solubility | Completely Soluble |
Specific Gravity | 1.05 - 1.10 |
Contents | Ready to use dechlorination liquid |
AQUAPURE ENGINEERING is offering speciality "Membrane Cleaning Chemical" which is used for cleaning RO membranes by removing and dispersing the deposited scale. This chemical is used to remove inorganic scales of calcium carbonate, calcium sulphate, magnesium, barium, strontium sulphate, fluoride, iron and silica.
AQUAPURE RO Maintenance Chemicals performance can be enhanced by adding low / high ph cleaners to the cleaning solution although some minor ph correction may be necessary.
AQUAPURE ENGINEERING offers a full range of Antiscalant and membrane cleaners to ensure the longevity and maximum production from your RO Plant.
It is safe to handle but use of safety goggles and hand gloves are recommended. In case of contact with skin, wash with copious amount of water
This product should be stored in cool and dry places, away from sources of heat, flame and direct sunlight for more shelf life.
(Low pH RO Membrane Cleaner For Colloidal Deposits)
ROKLEEN 21 Low pH Membrane Cleaner is a fast acting formulation for cleaning of RO/NF/UF membranes by dissolving and dispersing organic and mineral deposits which primarily comprise of carbonates and sulfates of calcium, barium, stronium and magnesium.
ROKLEEN 21 Low pH Membrane Cleaner is also effective in removing difficult iron scales, metal oxide deposits as well as silicates and colloidal clay.
pH (as such) | 4.0 to 5.0 |
---|---|
Appearance | Transparent liquid |
Water Solubility | Completely Soluble |
Specific Gravity | 1.02 to 1.05 |
Contents | Organo acid and Polymer
Cleaning of carbonate scales and metal oxides & metal hydroxide deposits, and assisting in removal of sulfate scales |
(High pH Membrane Cleaner For Biofilms)
ROKLEEN 27 High pH Membrane Cleaner is an alkaline liquid product for cleaning of contaminants like oils,organic compounds, silica scales and biological slimes and films from RO/NF/UF membranes.
ROKLEEN 27 High pH Membrane Cleaner also contains organic dispersants that helps to break down colloidal clay deposits and imparts better efficacy to biocides by penetrating into films.
pH (as such) | 8.5 to 9.5 |
---|---|
Appearance | Transparent liquid |
Water Solubility | Completely Soluble |
Specific Gravity | 1.02 to 1.05 |
Contents | Organic alkali &polymer
Cleaning of organic fouling, grease and oil deposits and assist in removal of sulfate deposits |
(Food Grade pH Booster for post-RO water)
SODIUM BICARBONATE is a white, crytalline powder that is commonly used as a buffering agent, an electrolyte replenisher, systemic alkalizer and in topical cleansing solutions.
It is stable in dry air, but it slowly decomposes in moist air. One gram dissolves in 10ml of water. It is insoluble in alcohol. Its solutions, when freshly prepared with cold water without shaking, are alkaline to litmus. The alkalinity increases as the solutions stand, are agitated or heated.
CHARACTERISTICS | UNITS |
IS : 2124 : 2000 |
Molecular Weight |
84 |
|
Total Alkalinity ( as NaHCO3 ) | %, min |
99.5 |
pH |
min |
8.8 |
Chlorides ( as Cl ) | %, min |
0.06 |
Matter Insoluble in Water |
%, min |
0.10 |
Suplhates ( as SO4 ) | %, min |
0.07 |
Iron ( as Fe ) |
%, min |
0.004 |
Heavy Metals ( as Pb ) | ppm |
5 |
Arsenic ( as As ) |
ppm |
1.5 |
Copper ( as Cu ) | ppm |
30 |